top of page
4_edited.png

Over Easy Solar xM-3

Lightweight vertical bifacial system for flat and green roofs.

VERTICAL

LIGHTWEIGHT

A lightweight vertical bifacial photovoltaic system supplied as preassembled units. Its vertical layout reduces shading over the vegetation and can minimise additional ballast, depending on the project design.

6f3ca363-5ddd-4b06-b565-7bb0fdcfd7c2_edited.png
System-build-up-Sempergreen-Lightweight-Solar-Green-Roof.png
Untitled design (18).png
SYSTEM TYPE
Vertical
Untitled design (18).png
SUITABLE ROOFS
Extensive green roofs and flat roofs
Untitled design (18).png
ROOF PITCH
Project-specific
MODULE ANGLE
Untitled design (18).png
Vertical, approximately 90°
Untitled design (18).png
ROOF PENETRATION
None

OVERVIEW

Over Easy Solar xM-3 is a lightweight photovoltaic system designed specifically for flat and green roofs. The modules are positioned vertically, allowing light and rainfall to reach the vegetation more evenly than with conventional low-angle arrays.

Its low system weight makes it particularly useful for roofs with restricted structural capacity.

HOW IT WORKS

Bifacial solar modules are mounted vertically within interconnected, prefabricated units. Roof-specific support feet distribute the load while maintaining drainage routes and access to the vegetation beneath the system.

Untitled design (22).png

KEY BENEFITS

image.png
image.png
image.png
image.png
image.png
image.png

Approximately 12 kg/m²


Preassembled vertical units


Bifacial east-west generation


Reduced vegetation shading


Rapid mechanical installation


Low-ballast or ballast-free potential

TECHNICAL DETAILS

Project Stage

New-build and retrofit projects

Indicative Saturated Load

Approximately 12 kg/m²

Module Layout

Vertical bifacial east-west arrangement

Module Compatibility

Modules integrated within the xM-3 unit

Mounting Method

Preassembled units with roof-specific support feet

Design Support

Roof-specific layout, wind and engineering support from Over Easy

LIMITATIONS

image.png
image.png
image.png
image.png

Requires specialist energy-yield modelling


Wind design is project-specific


Foot type depends on the roof

build-up


Roof slope and ballast require

approval

DOWNLOADS & RESOURCES

Untitled design (21).png
Certification Overview
LINK
Untitled design (21).png
Datasheet
PDF
Untitled design (62).png

Need help choosing the
right system?

Our team of green roof and solar experts are here to help with free advice and design guidance.

Untitled design (19).png
Free Technical Advice

Early-stage guidance, roof build-ups, planning policy and specification support.

Untitled design (19).png
Project Support

System coordination, installation sequencing and best-practice advice.

Untitled design (19).png
Bespoke System Design

BioSolar mounting options, layouts, performance and integration.

Untitled design (19).png
Trusted by Professionals

Programme planning, risk management and procurement support.

BioSolar Hub

Subscribe to our newsletter • Don’t miss out!

Office 

Unit 9 Winchester Hill Business Park,
Winchester Hill, Romsey, Hampshire, SO51 7UT

Contact 

hub@biosolarhub.co.uk

+44 023 8017 0215

bottom of page